Description
New Product Post Test Process Monitoring PM300
Features
- Automatic pressure curve learning
- Forging pressure trend detection
- Automatic start mode, the whole process of automatic monitoring of the production process
- 7-inch color touch screen
- Graphical interface is easy to operate
- Automatically record the production status of the day
- Automatically record 1000 production shutdowns
- Supports up to 6-Channel pressure bar sensor
< Slide left and right to view product specifications >
Specifications
Filterable items
Optional
Video
instruction
- For M3~M8 Screws and bolts, under head length less than 80mm
- Available for 2~5 cameras
- Can install rotating mechanism to inspect recess depth or broken pin
- Optional: wheel crack checking system (LS-1501)for head crack inspection
- Optional: bottom sorting system(LS-1503)for inspecting cutter presence.
- Optional: Bending checking module
- Optional: Eddy current system for material mix-up or with/without heat-treatment
- Pitch Distance
- Feature No.
- bevel thread
- Screw Length
- Feature Similarity
- Cone Point
- Zinc:Yes or No(Head Top View)
- Feature Length
- Pinhole Alignment
- Head Crack
- AF/AC
- Head Mark
- Mixed Material
- Inner Roundness
- Inner Concentricity
- Broken pin
- Inner Excess Material
- Shorten AF
- Deformed thread
- Feature-Center Distance
- Roundness
※One-way bearing: One-way bearing is used for feeding to prevent the wire from backing up.
The high-quality cutting mechanism is designed with four corners, and the material is made of special aluminum alloy, so there will be no deflection when cutting.
The high-quality cutting mechanism is designed with four corners, and the material is made of special aluminum alloy, so there will be no deflection when cutting.
The high-quality cutting mechanism is designed with four corners, and the material is made of special aluminum alloy, so there will be no deflection when cutting.
※五模及六模長尺寸特殊零件成型機CPS & CPD SERIES 5 &6 STATION BOLT PARTS FORMER
左右滑動查看表格
機型 | CPD-10B | CPS-10B | CPS-13B | CPS-17B | CPS-19B | CPS-24B | CPS-30B | CPS-36B | CPD-13B6SL |
規格 | |||||||||
模數 | 5 | 6 | 5 6 | 5 6 | 5 6 | 5 6 | 5 6 | 5 6 | 6 |
最大切斷直徑(mm) | 12 | 12 | 15 | 17 | 19 | 23 | 30 | 34 | 16 |
最大切斷長度(mm) | 120 | 100 | 110 | 140 | 135 | 200 | 250 | 280 | 180 |
後托頂出長度(mm) | 110 | 80 | 85 | 120 | 145 | 175 | 220 | 260 | 170 |
前托頂出長度(mm) | 25 | 25 | 25 | 30 | 35 | 45 | 45 | 50 | 30 |
夾子翻轉長度(mm) | 25 | 25 | 40 | 40 | 60 | 70 | 100 | 120 | 40 |
切模 (DXL mm) | 40x60 | 40x60 | 50x80 | 50x80 | 60x100 | 75x100 | 95x120 | 110x155 | 50x80 |
母模(DXL mm) | 50x130 | 50x130 | 70x135 | 80x150 | 95x175 | 108x200 | 125x240 | 155x280 | 70x185 |
母模中心距離(mm) | 69 | 69 | 87 | 93 | 114 | 126 | 138 | 174 | 87 |
公模束(DXL mm) | 40x110 | 40x110 | 50x120 | 50x120 | 65x150 | 75x180 | 90x220 | 110x240 | 50x130 |
主滑板行程(mm) | 150 | 150 | 190 | 200 | 240 | 280 | 360 | 400 | 250 |
壓造力(ton) | 55 | 65 | 100 135 | 140 170 | 185 220 | 220 260 | 300 400 | 460 550 | 110 |
每分鐘最大產能 (pcs/minute) | 160 | 160 | 130 | 120 | 110 | 90 | 65 | 60 | 120 |
主馬達(hp) | 20 | 25 | 30 40 | 40 50 | 75 75 | 100 100 | 125 125 | 150 175 | 50 |
機械重量(ton) | 14 | 16 | 17 19 | 24027 | 38 43 | 60 65 | 77 85 | 115 128 | 26 |