Skype

Home - Products - Bolt Former - High Performance Former

High Performance Former

Inquiry List(0)
機台特色
    The bolt former has is high performance, precision and stability. Max out put 400pcs/min. in same space and double production capability.
Video
Inquiry Download
Optimized Cut-off Knife

Optimized cut-off knife as square shap, the material of cut-off knife is special aluminum alloy which will avoid the sway problem for cutting operation.

Heavy Slider

The main slider equips with the heavy slider to stabilize the bolt former to avoid the vibration issue under the high speed operation.

Lightweight Transfer

The material of lightweight transfer is aluminum alloy which is low density and high strength. We also use wear resistant steel for main slider to reduce wear issue.

Oil Filter

Installing high efficiency centrifugal filter to keep clean inside the bolt former. The filter brand is MANN+HUMMEL from Britain.

Machine Inside
Clutch

The clutch is Japanese brand. The feature is lower air current request, but producing high torsion, therefore, the clutch could bear higher transmission power.

The feeding system is one-way bearing to avoid the material returning.
 
Human Machine Interface was developed by CCM's R&D team, it could be flexible adjustment depend on customer's request.

Human Machine Interface
Human Machine Interface
Wire Feeding, Stopper, K.O. Operated by Graphical Panel
Wire Feeding, Stopper, K.O. Operated by Graphical Panel
Wire Feeding, Stopper, K.O. Operated by Graphical Panel
Wire Feeding, Stopper, K.O. Operated by Graphical Panel
Wire Feeding, Stopper, K.O. Operated by Graphical Panel
Wire Feeding, Stopper, K.O. Operated by Graphical Panel
Operation Panel
Operation Panel
Abnormity Removing
Abnormity Removing
Error Log
Error Log
Abnormity Indication
Abnormity Indication

CHS SERIES 3&4 STATION FORMER

MODEL CHS-10B CHS-13B CHS-17B CHS-19B CHS-24B CHS-30B
SPECIFICATION
FORGING STATION 3 4 3 4 3 4 3 4 3 4 3 4
PRODUCTS SIZE 1/4 (M6) 5/16(M8) 3/8(M10) 1/2(M12) 5/8(M16) 3/4(M20)
MAX.L(mm) 50 70 100 125 150 200
MIN.L (mm) 12 16 16 20 25 40
CUT-OFF DIA MAX(mm) 8 10 12 15 18 23
CUT-OFF LENGTH MAX(mm) 70 95 125 165 190 260
KICK-OUT LENGTH MAX(mm) 60 80 110 145 175 235
P.K.O LENGTH MAX (mm) 14 20 25 25 30 35
CUT-OFF QUILL (D X L) (mm) 28×46 35x56 40x60 46x80 60x100 75x120
MAIN DIE HOLE (D X L) (mm) 50×65 70x115 80x135 95x165 100x195 135x260
DIES PITCH (mm) 60 87 93 114 126 150
PUNCH HOLE (D X L) (mm) 40×77 50x118 50x111 60x120 75x165 90x197
RAM STROKE (mm) 120 140 160 240 280 360
FORGING POWER (ton) 20 30 40 50 55 75 80 100 140 170 200 220
MAX. OUTPUT (pcs/minute) 400 350 280 250 165 120
MAIN MOTOR (hp) 20 25 30 30 40 50 60 75 100 100 125 125

CHS SERIES 5&6 STATION HIGH PERFORMANCE PARTS FORMER

MODEL CHS-10B CHS-13B CHS-17B CHS-19B CHS-24B CHS-30B
SPECIFICATION
FORGING STATION 5 6 5 6 5 6 5 6 5 6 5 6
MAX.L(mm) 70 85 110 125 160 200
CUT-OFF DIA MAX(mm) 10 13 17 19 24 30
CUT-OFF LENGTH MAX(mm) 85 110 140 160 200 250
KICK-OUT LENGTH MAX(mm) 75 95 120 140 175 220
P.K.O LENGTH MAX (mm) 16 20 25 30 35 45
MAX .CHUCK TURN LENGTH (mm) 25 30 40 50 60 80
CUT-OFF QUILL (D X L) (mm) 35x56 42x65 55x80 62x90 80x110 100x135
MAIN DIE HOLE (D X L) (mm) 60x105 70x140 80x180 95x200 110x220 135x260
DIES PITCH (mm) 69 87 93 114 126 150
PUNCH HOLE (D X L) (mm) 40x80 50x120 55x150 75x165 85x185 95x220
RAM STROKE (mm) 150 180 220 250 290 360
FORGING POWER (ton) 50 60 65 80 110 130 130 160 200 270 320 380
MAX. OUTPUT (pcs/minute) 240 230 190 180 165 155 145 140 130 125 115 105
MAIN MOTOR (hp) 20 50 50 75 75 100 100 125 125 150 150 175

Differentiation

MODEL Productitive (pcs/min)
STANDARD FORMER 200~250   (PCS /MIN)
HIGH PERFORMANCE FORMER 350~400   (PCS /MIN)
Taiwan Headquarters
  • No.58, Lane 110, Zhongxiao St., Hu-Nei Dist., 82945, Kaohsiung City, Taiwan
  • +886-7-6937-937
  • +886-7-6937-017
  • [email protected]
Kunshan Headquarters
  • No.225, ShengXiang Midst Rd., QianDeng Town, Kunshan City, Jiang Su, China Postcode:215321
  • +86-512-5729-7027
  • +86-512-5729-7029
  • [email protected]