Home - Products - Sorting Machine - Electronic Component Optical Inspection Machine - Appearance defect inspection machine - E8000 Color Dedicated Type for small parts

E8000 Color Dedicated Type for small parts

Inquiry List(0)
    1. Dedicated software for dedicated, fixed-shape objects, easy and quick for parts changeover.
    2. High reliability and accurate discharge system
    3. High-speed, stable feed-in
      • Software capable of side recognition
      • Different products changeover only need to replace the vibratory feeder
    4. High commonality: equipped with a zoom lens, when changing over chip specification only the magnification adjustment is needed, and no need for lens change.
    5. Excellent inspection and processing ability
      • Inhouse developed light source, inspection software, circuit design, free to set the inspection items, no need to repeat settings, parameters can be memorized
      • Humanized and intuitive operation interface
      • Independent color image processing
    6. Patented design of vacuum objects-guiding, aiming at the guiding effect and stable spacing of small size objects
    7. Optional two more stations, depending upon customer's requirement to determine light sources to catch different defects
      Example: Cracks and stains need to use different light sources. In this case, the same two stations are needed. Using different light sources to catch the abnormalities on the same side will avoid misjudgment.
    8. High speed; up to 8000pcs per minute


Applicable Size Range: 01005~0402

Inspectable defects: Poor product location, electrode width, electrode length, electrode spacing, electrode berry black, electrode peeling, poor electrode plating, electrode and electrode, body width, body length, body dyeing, body contamination, body defect, body scratch, body Discoloration

Appearances: Four / six / eight-sided detection (2 more optional stations to detect different abnormalities)

Speed: 8000 pcs/min(0402)

• Number of receiving boxes: Box for Accepted parts(1), Box for NG parts(3/4 ),box for Retest parts(1), box for scrapped parts (1)

• Resolution: 1.5μm/pixel (01005), 3μm/pixel (0201),5μm/pixel (0402), 8μm/pixel (0603),10μm/pixel (0805), 12μm/pixel (1206) * High resolution base

• CCD: Color High Speed CCD 640*480 pixels; CCD 1280*960 pixels

• Lighting: LED lighting (supplied with different light sources according to material)

• Working height: ca. 1100mm

• Machine color: Ivory white

• Power supply: 1ϕ 220V 50 / 60 Hz 1A

• Dimension: L92*W92*H180 cm

• Weight: 450 kg

• Main controller: PC / HMI / Vibratory feeder controller / interface on the front side

• Language display: Chinese / English

• Screen display: PC: 22"LED monitor ;HMI: 7"

• Emergency stop: Located on the front interface(button type)

• Back up: One set of Hard drive with backup

Open recirculation of vibratory feeder without top cover and side cover, speedy feed-in, no jamming Dual Accepted parts Chutes, non stop when qty reaches, provide efficiency
According to the customer's factory configuration requirements, both forward or reverse design are avilable 2 more stations as optional, settings based upon different lighting effect
Body contamination Tin stain on body Flaking Missing corner
Residual glue , tin splashing Silver glue, tin splashing Cracks Ceramic color
Residue Surface contamination Dents Electrode scratch
Taiwan Headquarters
  • No.58, Lane 110, Zhongxiao St., Hu-Nei Dist., 82945, Kaohsiung City, Taiwan
  • +886-7-6937-937
  • +886-7-6937-017
  • [email protected]
Kunshan Headquarters
  • No.225, ShengXiang Midst Rd., QianDeng Town, Kunshan City, Jiang Su, China Postcode:215321
  • +86-512-5729-7027
  • +86-512-5729-7029
  • [email protected]